Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 258)

8-8
M-4659
8.2 Setting the Measurement Channels
Setting One Channel at a Time
2. The channel setting
dialog box opens.
3. Select the tab of the item
to be configured.
4. After setting the
items, click here.
1. Double-click the
channel you wish to set.
Apply the settings.
Update according to the changes
in the [Meas] sheet.
The items in the measurement channel tab can be configured for each channel. The
items that are configured are the same as those configured on the spreadsheet. For
details, see the page corresponding to the item.