Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 79)

4-7
M-4659
Displaying Data with the Data V
iewer
1
2
3
4
5
6
7
8
Index
Display Color
You can select the color of each waveform. To create custom colors, click the [Define
Custom Colors] button in the [Color] dialog box.
Copy/Paste
You can copy the setup data of one channel or more to other channels. Use the following
procedure to copy and paste.
1. Click the source channel number that you want to copy. To select many channels, click
the first source channel, then drag over all the channels that you want to copy.
2. Click the [Copy] button at the bottom of the window.
3. Click the destination channel number. To select many channels, click the first
destination channel, then drag over all the channels where you want to paste.
4. Click the [Paste] button at the bottom of the window. The setup data is pasted in the
active waveform(s).
You can also copy and paste specific channel items.
After selecting the copy source in step 1, click the [Copy Details] button to display the [Copy
Details] dialog box.
Select the items that you want to copy.
Setting the Time Axis
Selecting absolute or relative time display
Select [Time Axis] - [Absolute Time] or [Relative Time].
Zoom in or zoom out on the time axis
Click either one
By selecting [Time Axis] - [All], the time axis is adjusted so that all the data can be
displayed. If you wish to zoom in or out by specifying the zoom rate, take the following
steps (resolution is 1/1000 to 20):
1. Select [Time Axis] - [Set Scale].
2. The [Time Axis Scale]
dialog box opens.
3. After entering the zoom rate,
click the [OK] button.
4.2 Displaying the Waveform