Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 235)

7-61
M-4659
1
2
3
4
5
6
7
8
Index
Configuring the CX1000/CX2000
Copying and Pasting Setup Data
You can copy the setup data of one channel or more to other channels. Use the following
procedure to copy and paste.
1. Click the source channel number that you want to copy. To select many channels,
click the first source channel, then drag over all the channels that you want to copy.
2. Click the [Copy] button at the bottom left of the window.
3. Click the destination channel number. To select many channels, click the first
destination channel, then drag over all the channels where you want to paste.
4. Click the [Paste] button.
You can also copy and paste specific channel items.
After selecting the copy source in step 1, click the [Copy Details] button to display the [Math
Channel Copy Details] dialog box.
Check whether the items you want to copy/paste are selected.
7.9 Computation Channel Settings