Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 90)

4-18
M-4659
4.3 Circular Display
Circular Display
1. Click here ([Window] - [Circular]).
Group selection tab
(click the tab of the group you wish to display)
2. The circular display screen opens.
Mark on the active waveform
Zone display area
Show/Hide the zone display area
Waveform label
(Select channel No.
or tag)
Display the cursor value
Trip line of the active
waveform
Move the waveform display position
(Scroll bar)
Absolute or relative time
Circular display area
Date
Drag this bar to change the
size of the zone display area
Turn ON/OFF waveform display
Alarm display area
Displayed time per cycle
Select the active
waveform
Trigger mark
Cursor
General Display Settings
The parameters in the [General Display Settings] dialog box that are different between
the circular display and the trend display (section 4.2) are as follows:
Trip Line
The trip lines on the circular screen cannot be dragged and dropped.
You can change the position of the trip lines by changing the values in the [General
Display Settings] dialog box.