Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 263)

8-13
M-4659
1
2
3
4
5
6
7
8
Index
Configuring the DX100/DX200/DX200C/MV100/MV200
Circular display setting (DX200C Only)
Normal trend display
Circular display
Set the time
corresponding
to one cycle on
the circular
display
clear the entire waveform when one cycle of the waveform
has been recorded.
one scale mark of the old waveform is cleared
when the remaining amount of waveform
reaches one scale mark
Message/File
Click here (also selectable from
[Setting] - [SET [Regular] Setting])
Enter the message
Copy the entered message
Paste to another message
number
Enter the comment
Enter the save destination
folder
Message
Up to 16 characters can be entered for the message.
File header
Adds a comment to the header section of the measurement/computation data file.
Director name
Set the name of the folder in which the measurement/computation data files is to be
saved.
Note
• Up to eight characters can be entered for the file header and director name. AUX, CON,
PRN, NUL, and CLOCK cannot be used.
• If the directory name is not specified, DATA0 (default) is automatically set.
Manual save
Select whether to save all the data or data that have not been saved during manual save.
8.4 Configuring the Settings