Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 185)

7-11
M-4659
1
2
3
4
5
6
7
8
Index
Configuring the CX1000/CX2000
DI/DO/SW-Regist (Contact Input)
Module Setting
Select the terminal blocks where you want to register contact inputs.
Style 3 or later
[CTRL1-DI] (2 loops or more), [CTRL2-DI] (4 loops or more), [CTRL3-DI] (6 loops or
more), [CTRL1-DO] (2 loops or more), [CTRL2-DO] (4 loops or more), [CTRL3-DO]
(6 loops or more), [EXT1-RI] (CX2000 with extension output terminal), [EXT1-RO]
(CX2000 with extension output terminal), [INT-SW1], [INT-SW2], [INT-SW3]
Style 2 or earlier
[CTRL1-2], [CTRL3-4] (4 loops or more), [CTRL5-6] (6 loops or more), [ETXDIO]
(CX2000 with extension output terminal)
Contact
For each contact input number, select the type of contact input from the following. Some
items may not be available depending on the system settings and control mode. For
details about the contact input settings, refer to the CX User’s Manual (IM 04L31A01-01E
or IM 04L31A01-03E).
• ControlStopAll
• ControlStartAll
• ControlStart/Stop
• Remote/Local
• Auto/Man
• Cascade (1-2, 3-4)
• Auto1-2 or 3-4
• Man1-2 or 3-4
• SPNumber0 to 3 bit (enter by selecting one of the options under SP Number set).
• PVSwitching
• Program Start
• ProgramStop
• Hold
• Advance
• Memory Start/Stop
• Trigger
• Alarm ACK
• Time Adjust
• Math Start/Stop
• Math Reset
• Manual Sample
• Panel1 Load to Panel3 Load
• Message1 to 8
• Snapshot
• PatternNo.Set (0-4 bits) (Register per the number selected under pattern number
setting. Available when program control is ON.)
7.3 Control Function Basic Settings