Modbus master settings, Ftp settings – Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 242
7-68
M-4659
7.11 Network Settings
Modbus Master Settings
When using the CX as a Modbus master, enter the Modbus master basic and command
settings. For details about the settings, refer to the CX1000/CX2000 Communication
Interface User’s Manual (IM 04L31A01-17E).
Click this tab
FTP Settings
Using the FTP function, measurement/calculation data can be automatically transferred
from the CX to the specified server as files. The FTP function can be used only with
Ethernet communications. When using the FTP function, specify the destination server
name, port number, and other settings in the dialog box below.
2. Click the [Primary] or [Secondary] tab
(Set both if using two (primary and secondary) FTP servers.).
1. Click this tab.
Enter file transfer
destination settings.