Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 18)

3-2
M-4659
Creating Setup Data by Configuring a New System
1. Click the [New] button, or choose [File] - [New] from the menu bar.
The [System Configuration] dialog box opens.
Click the [DXAdvanced] tab.
2. Enter all settings on the [DXAdvanced] tab, then click the [OK] button. The
DX1000/DX2000 setting screen in displayed.
Loading Preexisting Setup Data
1. Click the [Open] button, or choose [File] - [Open] from the menu bar.
The [Open] dialog box is displayed.
2. Select a setup data file (with the .PDL extension).
3.1 Starting the Harware Configurator