Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 111)

4-39
M-4659
Displaying Data with the Data V
iewer
1
2
3
4
5
6
7
8
Index
4.13 Printing
You can print a display data file, event data file, manually sampled data file, TLOG file, or
report file.
Setting the Printer
1. Select [File] - [Print Setup].
2. Set the printer, paper and orientation.
Note
Set the printer according to the configuration of the system that you are using.
Specifying the Contents to be Printed (for Display Data File and Event Data File)
Specify the contents to be printed before executing the print. This setting is not necessary
if you are printing a manually sampled data file, TLOG file, or report file.
Select [File] - [Print Settings]. The [Printout Setup] dialog box opens. When the
waveform is displayed, printing is carried out according to the settings under the Graph
Print tab of the [Printout Setup] dialog box. If numeric values are displayed, printing is
carried out according to the settings under the Sheet Print tab.
Setting Graph Print
Click this tab to set the graph print
Set the range, color, print group, and comment,
then click the [OK] button
If you selected [Select Group], click the [Select] button. The [Select Groups] dialog box
opens. Select the groups to be printed. Click the [OK] button to close the dialog box.