Patterns and data capture setup, Patterns and data capture, Patterns and data capture setup” on – Teledyne LeCroy SierraFC M8-4 User Manual User Manual

Page 40: Figure 2.9 on

Teledyne LeCroy

Easy Mode (Pre‐Defined Setups)

SierraFC M8‐4 Protocol Analyzer User Manual

Figure 2.9: Analyzer Trace Capture Display

For details about the results display, see

“Display Manipulation” on page 175

and see

“Viewer Configuration” on page 235

Patterns and Data Capture Setup

You can refine data capture by choosing Pattern and then selecting specific patterns for
capture. Additionally, you can define a different set of patterns to capture after trigger.

To define specific patterns for capture, click the Pattern button to display the Capture tab
for Pattern (see

Figure 2.10 on page 41

). You can drag and drop patterns from the

Patterns Library pane into the Active Pane. You can select the pattern and use the Add
and Remove arrows to move patterns between the Patterns Library and the Active pane.
You can also copy and sort patterns.