Teledyne LeCroy SierraFC M8-4 User Manual - Manual (Page 14)

Teledyne LeCroy Installing Your Analyzer
14 SierraFC M8‐4 Protocol Analyzer User Manual
Figure 1.4: LEDs
Status and Configuration Display
The Analyzer front LCD display indicates the configuration and status of operations. For
example, during initialization, the LCD panel displays boot status messages.
Installing Your Analyzer
Software Installation
The software works on systems using the Windows
®
XP, Windows Vista, Windows Server
2003, 2008 and Windows 7 operating systems.
1. Insert the Installation CD ROM into the CD drive on the host machine.
2. The installation automatically starts setup, unless Auto Run is off. In that case, select
the CD ROM from “My Computer” and click Setup.
3. After the warning to close all other programs and before starting the installation,
the Install component selection opens.
4. Select components for installation.
5. Click Next to complete the installation.
System restart
You must restart your computer before you can use your Analyzer software.
Error Message
If you get an error message during installation of the drivers for Window, consult your
system administrator. Your system may allow only administrator‐level users to copy such
driver files.