Search sub items, Search logic, Search direction – Teledyne LeCroy SierraFC M8-4 User Manual User Manual
Page 233: Search for
SierraFC M8‐4 Protocol Analyzer User Manual
233
Quick Search
Teledyne LeCroy
Search Sub Items
Search on exchange level
Checking the Search on exchange level checkbox will cause the application to examine
the Exchange level parameter for deciding on searching, rather than lower level
parameters. An example is RX_ID, which might be different for different Sequences in an
Exchange (the first Sequence's RX_ID is always 0xFFFF), but is considered unique for the
whole Exchange.
Search Logic
The default setting is Or Selected Items. With this setting, clicking Find Next locates all
selected items in turn. If you choose And Selected Items, you can set a logical AND
combination of items to find. Both options allow setting Advanced search features.
Search Direction
Choose either Forward or Backward direction in which to perform the search.
Search For
Choose a category to search in the Search For window. Each of the search categories
offers additional choices in the Search Items window to refine the search. Check items for
the selected category.
Protocol Error
You can refine the search to locate packets with an error or without an error.
Data Pattern
Search for Data Pattern allows you to search for a specific Data Type, Pattern, and Length.
Data Pattern Only
Data Payload Length Only
Data Pattern and Data Payload Length
Advanced options
Some of the Search For categories offer advanced options for search. To set these options,
highlight the search item in a category and click the Advanced button to open a dialog
and select options (see
).