Teledyne LeCroy SierraFC M8-4 User Manual - Manual (Page 222)

Teledyne LeCroy Quick Filtering
222 SierraFC M8‐4 Protocol Analyzer User Manual
Quick Filtering
The Filtering Setup allows you to modify data in the sample viewer display to include and
exclude packets with a set of user‐defined patterns and show the results in all views.
To set up filtering, you must have a trace open. Click the Filtering Setup button on
the top toolbar. The Quick Filtering dialog displays. Select a frame from the dropdown
menu, select Show or Hide to Show/Hide items and select AND/OR as shown below.
Figure 3.51: Quick Filtering Dialog
Click on the Advanced Mode button to display the Filter dialog (see Figure 3.53 on
page 223 ). Select the desired options to show/hide.
You can also click Filtering > Filtering to display the Quick Filtering dialog as shown
below.
Figure 3.52: Filtering Menu Options
Clicking on Enable Filtering toggles between enabling and disabling the filtering option.
Select Show/Hide
and AND/OR