Teledyne LeCroy SierraFC M8-4 User Manual - Manual (Page 227)

SierraFC M8‐4 Protocol Analyzer User Manual 227
Using Cursors and Bookmarks Teledyne LeCroy
Positioning the X Cursor
To position the X‐Cursor within the viewer data display, click the left mouse button in the
gray bar on the left side of the sample viewer next to the line in which to place the cursor.
Positioning the Y Cursor
To position the Y‐cursor within the viewer data display, click the right mouse button in the
gray bar on the left side of the sample viewer next to the line in which to place the cursor.
Note:
You can also left‐click to set the X‐cursor and right‐click to set the Y cursor in the Frame List View
by clicking in the narrow strip on the very left side of a cell.
Time
Time differences between the cursors are displayed in the Cursor Position toolbar. To
display the cursor position toolbar, select Toolbar from the view menu and choose Cursor
Position.
Figure 3.55: Cursor Position Toolbar
Locate Cursors
To quickly locate any cursor within the data viewer display, click the Go To button and
choose the cursor to locate. You can also locate a cursor by selecting Go To from the Edit
menu and choosing the cursor to locate.
Figure 3.56: Locate Cursor
Go to Time Stamp
To locate a timestamp, click the Go To button and choose Timestamp.
Enter a time stamp value in the Go To Timestamp dialog and click OK.
Figure 3.57: Go to Time Stamp