Teledyne LeCroy SierraFC M8-4 User Manual - Manual (Page 239)

SierraFC M8‐4 Protocol Analyzer User Manual 239
Port Calibration Teledyne LeCroy
Figure 3.70: Set Port Configuration Dialog
Port Calibration
The Input/Output Signals dialog displays the Units and Ports Input and Output Signal
parameters.
Figure 3.71: Port Calibration Dialog
To display the Input/Output Signals dialog, select 
Configuration > Port Calibration.
Input Signals have Input Equalization.
Output Signals have Output Level, De‐emphasis Level, and Time Constant.
You can Save and Load the settings, or Restore Factory settings.