Teledyne LeCroy SierraFC M8-4 User Manual - Manual (Page 258)

Teledyne LeCroy Interface
258 SierraFC M8‐4 Protocol Analyzer User Manual
Stop Batch Script: Stops a running Scenario batch file.
Rec Analyzer: Starts recording on the current analyzer.
Stop: Stops recording on the current analyzer.
Abort: Aborts recording.
Menus
The FC InFusion interface has the following menus:
File (see command descriptions in the “Buttons” section above)
 New Scenario, Open Scenario
 Open an FC InFusion supported file (.IFC file, .ifc and .bth)
 New Batch Script, Save Batch Script As
 New Library, Close Library, Save Library, Save Copy of Library As
 Open Log File
 Print Setup
 Exit
View
 Views (Library, Output, Customize; see window descriptions in “Buttons” section
above)
 Smart Docking
 Toolbar
 Status Bar
 Show Analyzer
Configuration
 Port Configuration (see “Port Configuration for FC InFusion” on page 262 )
 External Trig Setting (see “External Trig Setting” on page 245 )
 Batch Script Setting (see “Scenario Batch Files” on page 315 )
 Update Sierra Device (see “Update Sierra Device” on page 246 )
 All Connected Devices (see “Select Device” on page 18)
Tools: Browse UserData, System, or FC InFusion folder.
Help: Help Topics and About FC InFusion.