Teledyne LeCroy SierraFC M8-4 User Manual - Manual (Page 217)

SierraFC M8‐4 Protocol Analyzer User Manual 217
Tools Teledyne LeCroy
Figure 3.46: Tools - Self Test Dialog
Self Test Tabs
You can Self Test with the options available in the Self Test Dialog.
Choose the function to test and click the Start ... Check button. After a short time, the
Test Result appears to the right of the selected line.
Test Result Column
If a test is OK and you specified one run, the Test Result column on the right displays OK: 1
times (see the screen capture above).
If a test has an error and you specified one run, the Test Result column on the right
displays Error: 1 times (see the screen capture above).