Teledyne LeCroy SierraFC M8-4 User Manual - Manual (Page 212)

Teledyne LeCroy Statistical Report
212 SierraFC M8‐4 Protocol Analyzer User Manual
AL Commands
To display the AL Commands Report, click the AL Commands tab. The following
information is displayed in this report:
 Port: All, Custom and ports that are selected
 Source ID
 Destination ID
 Type: All, Custom and other
 Duration: All, Custom and other
 Count
 %
Figure 3.42: AL Commands Report
Exchange Performance Report
To display the Exchange Performance Report (see Figure 3.43 on page 213 ), click the
Exchange Performance tab. The following information is displayed in this report:
 Average Response
 Min Efficiency
 Max Efficiency
 Average Efficiency
 Total Command
 Total Byte: Represents count of data payloads. Removed idles and truncated pay‐
load frames do not affect the total byte value.
 Total Duration: All, Custom and other
 Min RW/Sec
 Max RW/Sec
 Average RW/Sec