Enable filter, Using cursors and bookmarks, Cursors – Teledyne LeCroy SierraFC M8-4 User Manual User Manual

Page 226

Text mode
Original mode

Teledyne LeCroy

Using Cursors and Bookmarks

226

SierraFC M8‐4 Protocol Analyzer User Manual

Figure 3.54: Selecting Filter State and/or External Signals

Enable Filter

Select Filtering > Enable Filtering or click the

Filter Enable button on the display

menu bar to toggle between Filtered and Unfiltered display.

Using Cursors and Bookmarks

Cursors

The data viewer display incorporates three cursors labeled X, Y, and T. All cursors are
initially overlaid and positioned at location 0, which is the trigger position of the display.
The Trigger, or T, cursor is the measurement reference and is always at location 0 in the
display.