Teledyne LeCroy SierraFC M8-4 User Manual - Manual (Page 151)

SierraFC M8‐4 Protocol Analyzer User Manual 151
Easy Mode (Pre‐Defined Setups) Teledyne LeCroy
 VSAN - FICON Data
 VSAN - FICON Command
 VSAN - FICON Status
 VSAN - FICON Control
 VSAN - FICON Command Data
 VSAN - FICON Link Control
 VSAN‐FCAE
 VSAN - FCAE‐ ASM
 VSAN‐FCAE‐1553
 VSAN - FCAE‐1553 Any
 VSAN - FCAE‐1553 Data
 VSAN - FCAE‐1553 Command
 VSAN - FCAE‐1553 Status
 VSAN FCAE‐RDMA
 VSAN FCAE RDMA FCP SCSI Command‐With Target Notification
 VSAN FCAE RDMA FCP Command Frame Information Unit ‐With Target Noti‐
fication
 VSAN FCAE RDMA FCP SCSI Command‐Without Target Notification
 VSAN FCAE RDMA FCP Command Frame Information Unit ‐Without Target
Notification
 VSAN‐FCVI
 FCVI(Any)
 FCVI(SEND_RQST)
 FCVI(WRITE_RQST)
 FCVI(READ_RQST)
 FCVI(SEND_RESP)
 FCVI(WRITE_RESP)
 FCVI(READ_RESP)
 FCVI(CONNECT_RQST)
 FCVI(DISCONNECT_RQST)
 FCVI(CONNECT_RESP1)
 FCVI(CONNECT_RESP2)
 FCVI(CONNECT_RESP3)
 FCVI(DISCONNECT_RESP)
 VSAN‐FCAV
 VSAN - FCAV(SIMPLE)
 VSAN - FCAV(EXTENDED)
 VSAN‐ADVB
 ADVB(Object0)
 ADVB(Object2/3)
 Custom Frame
 Protocol Errors
Choosing a Parameter
Either highlight the category and click the
+>> button, or double‐click the category, to
open a corresponding definition dialog. Click on the Okay button to move the pattern to
the Active pane.
To remove an item, highlight it in the Project Tree, then click the ‐<< button.