Teledyne LeCroy SierraFC M8-4 User Manual - Manual (Page 312)

Teledyne LeCroy Running Scenarios
312 SierraFC M8‐4 Protocol Analyzer User Manual
5. Select the Scenario for Ports 1 and 2 from the drop‐down list in the Port Assignment
panel.
Figure 4.35: Selecting a Scenario in the Port Assignment Panel
6. Repeat steps 4 and 5 to select Library and Scenario for Ports 3 and 4.
Figure 4.36: Library and Scenario Selected for All Ports
7. Click on the Configuration > Port Configuration or Set Port Configuration icon,
if you need to configure ports on the device. Click OK.