Teledyne LeCroy SierraFC M8-4 User Manual - Manual (Page 282)

Teledyne LeCroy Settings in Advanced Mode
282 SierraFC M8‐4 Protocol Analyzer User Manual
Monitor/Count Opens a window to count the number of
Events that occur during a session. A
session is a time interval during which a
Scenario runs.
Ordered Set Jam Delete Delete an Ordered Set Jam.
Remove [Replace
with IDLE] Remove an Ordered Set Jam or Replace
with another Ordered Set.
Replace with
another Ordered
Set Only replace with another Ordered Set.
Trigger Output Sends a signal out the trigger port to the
device downstream.
Analyzer Trigger The Action is to send a trigger to the
Analyzer.
External Trigger
Output The Action is to cause an external trigger
output.
Action Description