Teledyne LeCroy SierraFC M8-4 User Manual - Manual (Page 17)

SierraFC M8‐4 Protocol Analyzer User Manual 17
Expandability Teledyne LeCroy
To do so perform the following steps:
1. Make sure to stop any recordings in progress.
Note: You may plug/unplug the sync cable while the analyzer unit is powered on.
2. Connect the female end of the sync cable to the SYNC OUT port of the SierraFC
M8‐4.
3. Connect the male end of the sync cable to the SYNC IN port of the PCIe Summit
T3‐16.
Figure 1.7: Connecting a SierraFC M8-4 and a Summit T3-16