Teledyne LeCroy WaveRunner 6 Zi and 12-Bit HRO Getting Started Manual - Manual (Page 94)

WaveRunner 6 Zi and 12-Bit HRO
86 922136-00 Rev A
Moving Traces from Grid to Grid
You can move traces from grid to grid with the touch of a button.
Moving a Channel or Math Trace
1. Touch the trace descriptor label for the waveform you want to
move.
2. Touch the Next Grid button.
Note : If you have more than one waveform displayed on only one grid, a second
grid automatically opens when you select Next Grid .
Displays Containing Masks
Since masks are pixel-based display renderings, you can think of them as
part of the Display feature set on your instrument. Masks and mask testing
are applied to waveforms as part of Pass/Fail functionality accessed from
Analysis → Pass/Fail from the menu bar.
Note : For more detailed information about Masks and other Pass/Fail
functionality, such as removing a mask from your display, refer to Mask Testing
(on page 124).
Dual Display Grid Selection
Make a dual grid display selection for showing on an external display (once
properly connected to the I/O panel) by selecting Display → Display
Setup....