Teledyne LeCroy WaveRunner 6 Zi and 12-Bit HRO Getting Started Manual - Manual (Page 18)

WaveRunner 6 Zi and 12-Bit HRO
10 922136-00 Rev A
Note : For models without a latch on the left side of the display, grip the same side
firmly and rotate in an upward, clockwise twisting motion. The track clicks in and
out of the two positions without the use of the latch.
The user interface then adjusts its layout from landscape (horizontal) to
portrait (vertical). This setup is ideal for viewing high-amplitude signals.
The Rotating Display shown in portrait layout position.
Reverse the process by grasping the now upper side of the display. Again,
use your thumb to push upward on the release switch; but, now use your
wrist to forcibly rotate the display in a downward, counter-clockwise
twisting motion until the display locks back into landscape position.
The user interface then adjusts the layout back from portrait (vertical) to
landscape (horizontal).