Teledyne LeCroy WaveRunner 6 Zi and 12-Bit HRO Getting Started Manual - Manual (Page 27)

Getting Started Manual
922136-00 Rev A 19
B
Front Panel Control Groupings
The front panel is divided into sections based on various functions. The
following topics explain these sections in more detail.
Miscellaneous Controls and WaveStream Indicator
This topmost section of the front panel provides the following functions:

Touch Screen - By default this button's blue backlit LED is ON and
the touch screen is enabled. By pressing this button and turning off
the LED, the touch screen is then disabled.

Print - Press this button and it automatically executes the based on
the settings you've made as described in Printing and Hardcopy
Functions
(on page 147 ) .
You can set the oscilloscope to automatically spool directly to a
printer, to a file, an email (with attachment), or to the clipboard.

Scope Setup - Press once and the Scope Setup flyout menu is shown.
The Scope Setup flyout menu quickly provides access to Auto Setup,
C1 Find Scale, C2 Find Scale, C3 Find Scale, C4 Find Scale, and
Default Setup buttons. These functions perform various automatic
setup configurations to your instrument. This corresponds to the
Auto Setup... selection on the menu bar from the Vertical,
Timebase, or Trigger menus.
Press the Auto Setup... button on the flyout menu to perform a full
auto setup. Press a Channel Find Scale button on the flyout menu to
perform a quick auto setup for that channel only.