Teledyne LeCroy WaveRunner 6 Zi and 12-Bit HRO Getting Started Manual - Manual (Page 56)

WaveRunner 6 Zi and 12-Bit HRO
48 922136-00 Rev A
For many controls, once the Pop-Up Keypad is shown the Front Panel
Controls
(on page 18 ) can be used to adjust the value in the pop-up. The
Pop-Up contains Up and Down arrow buttons, Set to Max, Default, and
Min buttons, and the Keypad itself for providing your value.
The slider bar also has a handy default value button for quickly entering the
default for the control.
Default and Keypad Buttons on the Slider Bar are only shown on 7, 8, and 9
Zi models (with a keyboard attached).
UNIQUE WaveRunner 6 Zi and 12-Bit HRO and 12-Bit HRO FEATURE : The 6
Zi and 12-Bit HRO provides touch-screen interface controls in a different manner.
See
The WavePilot Control Area and The SuperKnob Overview in the online
help.
Shortcut Toolbar
Several dialogs contain common functions accessible from a row of buttons
that can save you having to select the respective function from the menu
bar or the Signal Display Grid Pop-Up Menu.
For example, at the bottom of the Channel Setup dialog, these buttons
(sometimes labeled as Actions) perform the following functions:

Measure - Opens the Measure menu. You can then select a
parameter from this menu without leaving the Channel Setup dialog.
The parameter automatically appears below the grid.

Zoom - Creates a zoom trace of the channel trace whose dialog is
currently displayed.

Math - Opens the Math menu. You can then select a math function
from this menu without leaving the Channel Setup dialog. A math
trace of the channel whose dialog is currently open is automatically
displayed.