Teledyne LeCroy WaveRunner 6 Zi and 12-Bit HRO Getting Started Manual - Manual (Page 33)

Getting Started Manual
922136-00 Rev A 25
B
Math, Zoom, and Memory Indicators and Controls

When pressed, the Zoom automatically creates a Zoom trace of all
active channels. Math and Memory traces must first be enabled on
their respective dialogs in Math → Math | Memory Setup... for use
by the front panel controls.

When Math, Zoom, or Memory traces are enabled - see Math →
Math | Zoom | Memory Setup..., respectively - the corresponding
indicator light illuminates and the Horizontal and Vertical controls
specifically control the Math, Zoom, or Memory trace.

The Push - Variable function on the Time/Div front panel control for
Horizontal only applies to Math, Zoom, or Memory traces and not
Channels. Press the button to toggle between fixed and variable
adjustments or turn the knob to change the value.
The WavePilot Control Area and The SuperKnob
The WavePilot Control Area contains buttons that correspond to specific
functions. These function buttons are used together with the SuperKnob to
provide increased instrument control at your fingertips.
The SuperKnob is a joystick-like knob in the center of the WavePilot Control
Area used to make selections or provide specific values.