Teledyne LeCroy WaveRunner 6 Zi and 12-Bit HRO Getting Started Manual - Manual (Page 32)

WaveRunner 6 Zi and 12-Bit HRO
24 922136-00 Rev A
Vertical Front Panel Controls
Note : Vertical front panel controls can be applied to signals , Math , Zoom , or
Memory traces. See Math, Zoom, and Memory Indicators and Controls (on
page 25) for more information.

Channels - The channel buttons (1 - 4 and Digital) control both
channel ON/OFF and which channel is active for the Vertical Offset
and Volts/Div knobs controls. If a channel is OFF, pressing that
channel button turns it on and makes it active. If a channel button is
ON, pressing that channel button makes it active, and then pressing
it a second time turns it OFF.

Offset - Press to toggle between a zero vertical offset value and the
previous vertical offset value for the selected channel. Turn to
change the vertical offset value for the selected channel.

Gain - Press to toggle between fixed and variable gain adjustment.
Turn to change the gain value.