Teledyne LeCroy WaveRunner 6 Zi and 12-Bit HRO Getting Started Manual - Manual (Page 175)

Getting Started Manual
922136-00 Rev A 167
B
20. Click Next to continue. The License Agreement page is displayed.
21. Click I Agree. The Choose Components page is displayed.
22. Select all X-Stream components and click Install.
Note : A Windows Security window may be displayed indicating that
Windows can't verify the publisher of this driver software. Choose Install
this driver software anyway and then click Install.
23. When the X-Stream installation is completed, reboot the
oscilloscope.
Note : Now you must activate Windows® using an Internet connection to
the Microsoft Web site or by telephone. When activating, have the
Windows Product Key number handy (it is affixed to the rear of the
oscilloscope).
Restarting the Application
Upon initial power-up, the oscilloscope automatically loads the instrument
application software. If you exit the application and want to reload it, touch
the shortcut icon on the desktop:
Note : Maximize the application by touching the shortcut icon located on the
lower-right of the screen.
Restarting the Operating System
If you need to restart the Windows® operating system, reboot the
oscilloscope by pressing and holding in the power switch for 10 seconds,
then turning the power on again.