IAI America PSEL - Manual (Page 426)

416
Appendix
Axis-Specific Parameters
No Parameter name
Default value
(Reference)
Input range Unit Remarks
95 Zone 4 MAX 0 -99999999
~ 99999999
0.001 mm Zone output ON if MAX > MIN or MAX  Current position  MIN
Zone output ON if MAX < MIN, Current position  MAX, or MIN
 Current position
Zone output ignored if MAX = MIN
(The “MAX < MIN” setting is effective in main application
version 0.21 or later.)
* Must be inside the range for at least 3 msec.
96 Zone 4 MIN 0 -99999999
~ 99999999
0.001 mm Zone output ON if MAX > MIN or MAX  Current position  MIN
Zone output ON if MAX < MIN, Current position
 MAX, or MIN
 Current position
Zone output ignored if MAX = MIN
(The “MAX < MIN” setting is effective in main application
version 0.21 or later.)
* Must be inside the range for at least 3 msec.
97 Zone 4 output number 0 0 ~ 899 Physical output port or global flag
(Output is invalid if “0” is input; multiple specification is invalid)
98 For future expansion 4 Reference
only
99 For future expansion 2 Reference
only
100
~
118
(For expansion) 0 ~
119 FSG 0 0 ~ 100
120 FFF 10 0 ~ 100 * Change is prohibited unless instructed by the manufacturer.
121
~
170
(For expansion) 0 ~
171 0 ~
172 0 ~
173 0 ~
174 0 ~
175 0 ~
176 0 ~
~
200
(For expansion) 0 ~