IAI America PSEL - Manual (Page 425)

415
Appendix
Axis-Specific Parameters
No Parameter name
Default value
(Reference)
Input range Unit Remarks
86 Zone 1 MAX 0 -99999999
~ 99999999
0.001 mm Zone output ON if MAX > MIN or MAX  Current position  MIN
Zone output ON if MAX < MIN, Current position  MAX, or MIN
 Current position
Zone output ignored if MAX = MIN
(The “MAX < MIN” setting is effective in main application
version 0.21 or later.)
* Must be inside the range for at least 3 msec.
87 Zone 1 MIN 0 -99999999
~ 99999999
0.001 mm Zone output ON if MAX > MIN or MAX  Current position  MIN
Zone output ON if MAX < MIN, Current position
 MAX, or MIN
 Current position
Zone output ignored if MAX = MIN
(The “MAX < MIN” setting is effective in main application
version 0.21 or later.)
* Must be inside the range for at least 3 msec.
88 Zone 1 output number 0 0 ~ 899 Physical output port or global flag
(Output is invalid if “0” is input; multiple specification is invalid)
89 Zone 2 MAX 0 -99999999
~ 99999999
0.001 mm Zone output ON if MAX > MIN or MAX  Current position  MIN
Zone output ON if MAX < MIN, Current position  MAX, or MIN
 Current position
Zone output ignored if MAX = MIN
(The “MAX < MIN” setting is effective in main application
version 0.21 or later.)
* Must be inside the range for at least 3 msec.
90 Zone 2 MIN 0 -99999999
~ 99999999
0.001 mm Zone output ON if MAX > MIN or MAX  Current position  MIN
Zone output ON if MAX < MIN, Current position  MAX, or MIN
 Current position
Zone output ignored if MAX = MIN
(The “MAX < MIN” setting is effective in main application
version 0.21 or later.)
* Must be inside the range for at least 3 msec.
91 Zone 2 output number 0 0 ~ 899 Physical output port or global flag
(Output is invalid if “0” is input; multiple specification is invalid)
92 Zone 3 MAX 0 -99999999
~ 99999999
0.001 mm Zone output ON if MAX > MIN or MAX  Current position  MIN
Zone output ON if MAX < MIN, Current position
 MAX, or MIN
 Current position
Zone output ignored if MAX = MIN
(The “MAX < MIN” setting is effective in main application
version 0.21 or later.)
* Must be inside the range for at least 3 msec.
93 Zone 3 MIN 0 -99999999
~ 99999999
0.001 mm Zone output ON if MAX > MIN or MAX  Current position  MIN
Zone output ON if MAX < MIN, Current position  MAX, or MIN
 Current position
Zone output ignored if MAX = MIN
(The “MAX < MIN” setting is effective in main application
version 0.21 or later.)
* Must be inside the range for at least 3 msec.
94 Zone 3 output number 0 0 ~ 899 Physical output port or global flag
(Output is invalid if “0” is input; multiple specification is invalid)