Planet Technology IP DSLAM IDL-4801 - Manual (Page 452)

IDL series User Guide 452
5.14.2.2 Create igmpsnoop mvlan config
Description:
Use this command to create.
Command Syntax:
create igmpsnoop mvlan config grpipaddr srcipaddr srcipaddr
vlanid | none [mcastvlanstag | none]
[mcastvlanctag | invlan | none] [portlist |
none]
5.14.2.3 Delete igmpsnoop mvlan config
Description:
Use this command to delete.
Command Syntax:
delete igmpsnoop mvlan config [grpipaddr ] [srcipaddr
] [vlanid | none]
5.14.2.4 Modify igmpsnoop mvlan config
Description:
Use this command to modify.
Command Syntax:
modify igmpsnoop mvlan config grpipaddr srcipaddr
vlanid | none [mcastvlanstag |
none] [mcastvlanctag | invlan | none] [portlist
| none]
Parameters:
Name Description
grpipaddr
<grpipaddr-val>
This parameter specifies the Destination Group IP address
for a multicast stream. The source address and destination
group address together define a multicast stream. In case of
value 0, this parameter is ignored while determining
Multicast Vlan
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional