8 redundancy aggrport list commands, 1 get aggrport list – Planet Technology IP DSLAM IDL-4801 User Manual
Page 151
IP DSLAM
151
FallBack
This specifies whether fallback is to happen for aggregator interface,
when a link goes down. As fallback trigger leads to re-propagation of
protocol PDUs to the links based on the state of the links, this may be
enabled if re-propagation of protocol PDUs is required for immediate
restore of peer protocol state on uplink devices. If such a treatment is
not required and Protocol time out may only be trigger for
re-propagation, Fallback trigger should be disabled.
Caution:
z
Redundancy aggregator shall not be created, if aggregator interface is not
created or if LACP aggregator is created for the aggregator interface.
References:
z
create aggr intf command
z
get aggr intf command
5.4.8 Redundancy aggrport list Commands
5.4.8.1 Get aggrport list
Description:
Use this command to get.
Command Syntax:
get rdncy aggrport list [aggrifname <interface-name>]
Parameters:
Name
Description
aggrifname
Index of the redundancy aggregator, for which layer2
interfaces are associated. Valid Value is aggr-0
Type: Get -- Optional
Valid values: aggr-0
Example:
$ get rdncy aggrport list aggrifname aggr-0