Planet Technology IP DSLAM IDL-4801 - Manual (Page 579)

IP DSLAM 579
5.22.5.3 Reset rmon netbuf
Description:
Use this command to reset some parameters of netbuf. This command will reset
the following parameters of netbuf.
z
Set ThresholdCount value to zero.
z Set AllocFailCount value to zero
z Set WaterMark to the number of net buffers currently used by system.
z
Set FreeFailCount value to the zero.
Command Syntax:
reset rmon netbuf
Parameters:
None
Example:
$ reset rmon netbuf
Output Field:
None
5.22.6 RMON Semaphore Info Commands
5.22.6.1 Get rmon semaphore
Description:
Use this command to get the information about all the semaphores present in the
system.
Command Syntax:
get rmon semaphore
Parameters:
None
Example:
$ get rmon semaphore