Planet Technology IP DSLAM IDL-4801 - Manual (Page 368)

IDL series User Guide 368
5.13.14.4 Modify clfr tree profile
Description:
Use this command to modify.
Command Syntax:
modify clfr tree profile tname pid [isroot true|false]
Parameter:
Name Description
tname Name of the classifier tree
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Default value: -----
pid Profile Id. It should be unique within a tree
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Valid values: 1 - 0xffffffff
Default value: -----
pname Name of the profile which is to be added
Type: Create -- Mandatory
Delete -- Optional
Modify -- Optional
Get -- Optional
Default value: -----
isroot This specifies whether this profile is exported as a root profile or not. Only
root profiles of the nodes can be specified as an entry point on an interface.
Type: Create -- Optional
Delete -- Optional
Modify -- Optional
Get -- Optional
Valid values: true, false
Default value:FALSE
Example:
$ create clfr tree profile tname tree1 pid 4 pname srcip