beautypg.com

3 bridge port trfclassmap commands, 1 get bridge port trfclassmap, 2 modify bridge port trfclassmap – Planet Technology IP DSLAM IDL-4801 User Manual

Page 117

background image

IP DSLAM

117

5.2.3 Bridge port trfclassmap Commands

5.2.3.1 Get bridge port trfclassmap

Description:

Use this command to get.

Command Syntax:

get bridge port trfclassmap [portid ] [regenprio ]


5.2.3.2 Modify bridge port trfclassmap

Description:

Use this command to modify.

Command Syntax:

modify bridge port trfclassmap portid regenprio

[trfclass ]

Parameters:

Name

Description

portid

Port number of the port for which this entry contains

bridge management information.

Type: Modify - Mandatory

Get - Optional

Valid values: 1-386

regenprio

The Priority value evaluated for the received frame. In

our case, it is the regenerated user priority. This

regenerated priority is mapped from user priority

determined by a) packet classifier rule indicating user

priority for that port b) user priority received in the tag

header and c) default source priority of the port, in that

order. It lies in the range 0-7

Type: Modify - Mandatory

Get - Optional

Valid values: 0 - 7

trfclass

The Traffic Class the received frame is mapped to. The

maximum value of trafficClass is defined by numTrfClass

parameter of Bridge Port PrioInfo. The default value of

this field shall be determined according to table 7-2

described in ANSI/IEEE Std 802.1d 1998 Edition

This manual is related to the following products: