beautypg.com

Planet Technology IP DSLAM IDL-4801 User Manual

Page 225

background image

IP DSLAM

225

Type: Modify -- Optional

atucthreshintlratedn

<atucthreshintlratedn-val>

Applies to 'Interleave' channels only. Configured change in rate

causing an adslAtucRateChangeTrap. A trap is produced when:

ChanCurrTxRate <= ChanPrevTxRate minus the value of this

object.

Type: Modify -- Optional

atucinitfailtrap False | True

Enables and disables the InitFailureTrap. This object is defaulted

disable.

Type: Modify -- Optional

Valid values: False, True

atucoptrapenable False |

True

Enables/disables the OpStateChangeTrap

Type: Modify -- Optional

Valid values: False, True

aturthresh15minlofs

<aturthresh15minlofs-val>

The number of Loss of Frame Seconds encountered by an ADSL

interface within any given 15 minutes performance data collection

period, which causes the SNMP agent to send an

'adslAturPerfLofsThreshTrap'

Type: Modify -- Optional

Valid values: 0 - 900

aturthresh15minloss

<aturthresh15minloss-val>

The number of Loss of Signal Seconds encountered by an ADSL

interface within any given 15 minutes performance data collection

period, which causes the SNMP agent to send an

'adslAturPerfLossThreshTrap'

Type: Modify -- Optional

Valid values: 0 - 900

aturthresh15minlprs

<aturthresh15minlprs-val>

The number of Loss of Power Seconds encountered by an ADSL

interface within any given 15 minutes performance data collection

period, which causes the SNMP agent to send an

'adslAturPerfLprsThreshTrap'

Type: Modify -- Optional

Valid values: 0 - 900

aturthresh15miness

<aturthresh15miness-val>

The number of Errored Seconds encountered by an ADSL interface

within any given 15 minutes performance data collection period,

which causes the SNMP agent to send an

'adslAturPerfESsThreshTrap'

Type: Modify -- Optional

Valid values: 0 - 900

aturthreshfastrateup

<aturthreshfastrateup-val>

Applies to 'Fast' channels only. Configured change in rate causing

an adslAturRateChangeTrap A trap is produced when:

ChanCurrTxRate > ChanPrevTxRate plus the value of this object.

This manual is related to the following products: