Planet Technology IP DSLAM IDL-4801 - Manual (Page 149)

IP DSLAM 149
5.4.7.2 Create rdncy aggr info
Description:
Use this command to create.
Command Syntax:
create rdncy aggr info ifname ifname [revdistrib Enable | Disable] [fallback
Enable | Disable]
5.4.7.3 Delete rdncy aggr info
Description:
Use this command to delete
Command Syntax:
delete rdncy aggr info ifname
5.4.7.4 Modify rdncy aggr info
Description:
Use this command to modify
Command Syntax:
modify rdncy aggr info ifname [revdistrib Enable | Disable]
[fallback Enable | Disable]
Parameters:
Name Description
ifname This specifies the interface index used for the Redundancy
Aggregator type of interfaces. Valid Value is aggr-0
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Valid values: aggr-0
revdistrib Enable |
Disable
It denotes whether reverse distribution filtering is to be enforced
for traffic in the receiving direction, when both the links are
active, for this aggregator interface. If duplicate packets are
expected on the redundant links (if uplink aggregating device is
layer2 switch), Reverse distribution filtering may be enabled.