Planet Technology IP DSLAM IDL-4801 - Manual (Page 497)

IP DSLAM 497
Parameters:
Name Description
padimaxnumretries
<padimaxnumretries-val>
Maximum number of times the PPPoE Client sends a
PADI for establishing a PPPoE Session.
Type: Modify －Optional
Valid values: 1 -10
padrmaxnumretries
<padrmaxnumretries
val>
Maximum number of times the PPPoE Client sends a
PADR for establishing a PPPoE Session.
Type: Modify － Optional
Valid values: 1 -10
paditxintrvl <paditxintrvl
-val>
The time, n seconds, between PADI retries from the
PPPoE Client.
Type: Modify － Optional
Valid values: 1 -60
padrtxintrvl
<padrtxintrvl-val>
The time, n seconds, between PADR retries from the
PPPoE Client.
Type: Modify － Optional
Valid values: 1 -60
wandntmrintrvl
<wandntmrintrvl-val>
The time, n seconds, for timeout of the WAN Down
Timer. The timer is started when the WAN goes down,
and if the timer times out, the session is teared down.
A value of zero for this timer means it is not running.
Type: Modify － Optional
Valid values: 0 - 0xffffffff
inactivitytmrintrvl
<inactivitytmrintrvl-val>
The time, n seconds, for timeout of the Inactivity Timer.
The session can remain inactive for atmost these n
seconds after which it is teared down. A value of zero
means the timer is not running.
Type: Modify － Optional
Valid values: 0 - 0xffffffff
discmaxnumretries
<discmaxnumretries-val>
The maximum number of times the PPPoE client does
a discovery stage for establishing a PPPoE session. A
trap is given to GAG on reaching this number.
Type: Modify － Optional
Valid values: 1 -5
Example:
$ get pppoe global Config