beautypg.com

19 filter namedlist map commands, 1 get filter namedlist map, 2 create filter namedlist map – Planet Technology IP DSLAM IDL-4801 User Manual

Page 377: 3 delete filter namedlist map

background image

IP DSLAM

377

specified with subrules having cmptype as innamedlist or

notinnamedlist. It can only be used for mapping to create genlist of

an interface.

Value Type

This field specifies the value type of list. Value type should match

value type of subrule field for which comparsion type is

innamedlist or notinnamedlist. It should be 'U32' in case a rule

containing IP subrule or Generic subrule with comparision type

(srcaddrcmp / gencmp) as 'ingenlist' or 'notingenlist' is attached on

same interface. Currently only 'U32' value is supported.


5.13.19 Filter namedlist map Commands

5.13.19.1 Get filter namedlist map

Description:

Use this command to get.

Command Syntax:

get filter namedlist map [ifname ]

5.13.19.2 Create filter namedlist map

Description:

Use this command to create.

Command Syntax:

create filter namedlist map ifname listid

5.13.19.3 Delete filter namedlist map

Description:

Use this command to delete.

Command Syntax:

delete filter namedlist map ifname

Parameter:

Name

Description

ifname

This specifies the eoa ,pppoe, ipoe or ethernet interface to

which named generic list is attached. Valid values for the field

are between EOA-0 and EOA-23 or between eth-0 and eth-1or

This manual is related to the following products: