3 reset rmon queue, 5 rmon net buffers info commands, 1 get rmon netbuf – Planet Technology IP DSLAM IDL-4801 User Manual
Page 576

IDL series User Guide
576
5.22.4.3 Reset rmon queue
Description:
Use this command to reset some parameters of queue. This command will reset
the following parameters of queue.
z
Set DropCount value to zero.
z
Set watermark value to the value of the currently used size of queue .
z
Set ThresholdCount value to the zero.
Command Syntax:
Reset rmon queue
Parameters:
None
Example:
$ reset rmon queue
Output Field:
None
5.22.5 RMON Net buffers Info Commands
5.22.5.1 Get rmon netbuf
Description:
Use this command to get the information about all the net buffers present in the
system.
Command Syntax:
get rmon netbuf
Parameters
None
Example:
$ get rmon netbuf
This manual is related to the following products: