Planet Technology IP DSLAM IDL-4801 - Manual (Page 606)

IDL series User Guide 606
- Crash in CP self processing
- DP Init Failure
- CP crashed after DP Init
- DP crashed after DP Init
- DP internal Failure
- System in Loop
- Crash in DP Processing
SystemUpTime This specifies the system up time in:
Days : Hours : Minutes : Seconds
PSR Reg This specifies the value of the processor state register at the
time of the crash.
Wim Reg The window invalid mask register.
PC This specifies the value of the program counter at the time of
the crash.
nPC This specifies the value of the next program counter at the
time of the crash.
Y Reg MSW This specifies the value of MSW of the Y Register at the time
of the crash.
Y Reg LSW This specifies the value of LSW of the Y Register at the time of
the crash.
Trap Num This specifies the number of traps that caused the crash.
Trap Base Reg This specifies the value of the Trap Base register at the time of
the crash.
Fault Status Reg This specifies the value of the Fault Status Register at the time
of the crash.
Double Fault Reg This specifies the value of the Double Fault Register at the
time of the crash.
IER This specifies the value of the Implementation Extension
Register at the time of the crash.
Alternate Window - Reg#
Local
For crashes involving Alternate Windows, this capture
specifies all local register for Alternate Windows # 24 to 31
(0x1f to 0x18).
Alternate Window - Reg#
In
For crashes involving Alternate Windows, this capture
specifies all input register for Alternate Windows # 24 to
31(0x1f to 0x18).
Standard Window Dump
- Registers - Global
The Sparclet Global register.
Standard Window Dump
- Registers - Out
The output registers of the specified Sparclet Window.
Standard Window Dump The local registers of the specified Sparclet Window.