Planet Technology IP DSLAM IDL-4801 - Manual (Page 510)

IDL series User Guide 510
Modify － Optional
Default value: Normal
enable | disable Administrative status of the interface
Type: Optional
Valid values: enable or disable
Default Value: enable
pktpriority Priority to be set in tagged PPPOE frames or
PPP packets sent over this port from Control
Plane .This priority shall also be used for choice of
traffic class/ Queue on outgoing interface whether
the frame is tagged or not.In case the bridge port is
over an Aggregated ATM VC, this will also be
used to identify the VC, on which the packet is to
be sent.
Type: Create － Optional
Modify － Optional
Valid values: 0 – 7
Default value: 0
Example:
$ create pppr intf ifname pppr-0 lowif aal5-0 maxPdu 1484 ppprAckTO 10
lowifToggleTimerTO 10 nature dynamic configstatus Normal
Output:
Verbose Mode On
Entry Created
Ifname : pppr-0 Low IfName : aal5-0
Max PDU Size : 1484 Ter Ack TimeOut : 10
Lowif Toggle TimeOut : 10
Nature : dynamic Config Status : Normal
Operational Status : up Admin Status : up
PPPOA PacketsPrio:2
Verbose Mode Off:
Entry Created