6 lacp aggrport stats commands, 1 get lacp aggrport stats, 2 reset lacp aggrport stats – Planet Technology IP DSLAM IDL-4801 User Manual
Page 147

IP DSLAM
147
5.4.6 LACP AGGRPort Stats Commands
5.4.6.1 Get lacp aggrport stats
Description:
Use this command to get LACP aggregator port statistics.
Command Syntax:
get lacp aggrport stats [ifname
5.4.6.2 Reset lacp aggrport stats
Description:
Use this command to reset LACP aggregator port statistics.
Command Syntax:
reset lacp aggrport stats ifname
Note:
This command is not supported in this release.
Parameters:
Name
Description
Ifname
The IfName of the Ethernet interface for the
aggregator.
Type : Modify - Mandatory
Get - Optional
Valid values : eth-*, eoa-*
Example :
$ get lacp aggrport stats ifname eth-0
Output:
Interface : eth-0
LACPDUs Rx : 1 LACPDUs Tx : 1
MarkerPDUs Rx : 1 MarkerPDUs Tx : 1
Marker Response PDUs Rx : 1 Marker Response PDUs Tx : 1
Unknown Rx : 1 Illegal Rx : 1