19 adsl atur traps commands, 1 get adsl atur traps – Planet Technology IP DSLAM IDL-4801 User Manual
Page 272
IDL series User Guide
272
downstream QLN (f) values in dB. (Not available for ADSL and
ADSL2plus)
DMT Bin SNR
The DELT-related parameter that provides an array of real
downstream SNR (f) values in dB (Not available for ADSL and
ADSL2plus)
Signal Atn(dB/10)
DELT-related parameter that provides the downtream signal
attenuation (length = 4 bytes). (Not available for ADSL and
ADSL2plus).
AturDMTBinBits
Number of bits per bin for the bin indexed by this element of the
string. The 0th element contains the number of bits for bin 0
through to the 255th element, which contains the number of bits for
bin 255. The range of expected values is from 0 to 15 bits per bin
(256 bytes for Annex A and Annex B, 512 bytes for G.Span/Adsl+,
1024 bytes for G.Span Plus).
References:
z ADSL
commands
5.9.19 ADSL ATUR Traps Commands
5.9.19.1 Get adsl atur traps
Description:
This command is used to get.
Command Syntax:
get adsl atur traps [ifname Parameters: Name Description ifname The ADSL interface name. Type : Get – Mandatory Valid values: dsl-0 – dsl-23 Example: $ get adsl atur traps ifname dsl-0