Planet Technology IP DSLAM IDL-4801 - Manual (Page 549)

IP DSLAM 549
5.21.7.4 Modify rl profile info
Description:
Use this command to modify
Command Syntax:
modify rl profile info profileid [ rate ] [ mbs ]
[ level packet | byte ] [ type sr2cm | trtcm ] [ peakrate ] [ pbs
]
Parameters:
Name Description
profileid Rate limiter's configuration profile identifier,
whichuniquely identifies the configuration profile. The
configuration profile contains all parameters required
for rate limiting algorithm to operate.
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Valid values: 1 - 16
rate This field defines the committed information rate. If
'level' is 'packet'(1), the unit is packets per second. If
'level' is 'byte'(2), the unit is bits per second.
Type: Create -- Optional
Modify -- Optional
Valid values: 1 - 100000000
Default value: 100000000
mbs This field defines the committed burst size. If 'level' is
'packet'(1), the unit is number of packets. If 'level' is
'byte'(2), the unit is number of bytes.
Type: Create -- Optional
Modify -- Optional
Valid values: 4 - 65535
Default value: 65535