Planet Technology IP DSLAM IDL-4801 - Manual (Page 159)

IP DSLAM 159
5.5.4.3 Delete atm port
Description:
Use this command to delete.
Command Syntax:
delete atm port ifname
5.5.4.4 Modify atm port
Description:
Use this command to modify.
Command Syntax:
modify atm port ifname [ maxvc ] [ maxvpibits
] [ maxvcibits ] [ oamsrc ] [ orl
] [ trfclassprofileid ] [ profilename
] [ atmtransporttype cell | packet ] [ enable | disable ]
Parameters:
Name Description
ifname Physical interface index
Type: Create － Mandatory
Delete － Mandatory
Modify － Mandatory
Get － Optional
lowif <lowif-val> This is the IfIndex of the low interface on which this ATM port is
configured. Lower interface can be of type dsl-* or dsli-* or dslf-* or
abond-*
Type: Create － Mandatory
maxvc <maxvc-val> This specifies the maximum number of VCCs (PVCCs), supported at
this ATM interface. This field is not valid if the atmtransporttype has the
value packet
Type: Create － Optional
Modify － Optional
Valid values: 1 -8
Default value: 8
maxvpibits
<maxvpibits-val>
The maximum number of active VPI bits configured for use at the ATM
interface.
Type: Create － Optional