Planet Technology IP DSLAM IDL-4801 - Manual (Page 609)

IP DSLAM 609
5.25.5 System info Commands
5.25.5.1 Get system info
Description:
This command to get system parameters.
Command Syntax:
get system info
5.25.5.2 Modify system info
Description:
Use this command to modify the system parameters.
Command Syntax:
modify system info [contact ] [name ] [location
] [vendor ] [logthresh ]
[systime ] [dst ] [timezone ]
Parameters:
Name Description:
contact This contains the textual identification of the contact person
for this modem, together with information on how to contact
this person
Type: Optional
Valid values: String of up to 63 ASCII Characters
name This specifies the name of the modem
Type: Optional
Valid values: String of up to 63 ASCII Characters
Location This specifies the physical location of this modem Type:
Optional
Valid values: String of up to 63 ASCII Characters
vendor This contains the vendor-specific information
Type: Optional
Valid values: String of up to 63 ASCII Characters
logthresh This specifies the severity level of the trap equal to or lower
than that shall be logged. 1 is the lowest and represents
critical traps. Changing the parameter’s value in a flashless
system shall have no effect as there is no NVRAM support
present to log traps. Type: Optional