Planet Technology IP DSLAM IDL-4801 - Manual (Page 470)

IDL series User Guide 470
Database) where there is a single RID in the system and
all flows map to this RID. This RID has to be explicitly
created and no more than one RID can be created in the
system in this mode. Flows for all created VLANs shall
map to this RID for routing.
Type: Create － Optional
Delete － Mandatory
Get － Optional
Valid values: 0 - 4095
ip <ip-address> IP address corresponding to the media-dependent
physical address.
Type: Create － Mandatory
Delete － Mandatory
Get － Optional
Valid values: 0.0.0.0 - 223.255.255.255
macaddr <mac-address> The media-dependent physical address
Type: Create － Mandatory
Valid values: 0:0:0:0:0:1 - ff:ff:ff:ff:ff:fe
Example:
$ create arp rid 1 ip 192.168.161.11 macaddr 00:11:22:33:44:55
Output:
Verbose Mode On
Entry Created
RID : 1 Ifname : -
Type : static Mac Address : 00:11:22:33:44:55
Ip Address. : 192.168.161.11
Verbose Mode Off:
Entry Created
Output Fields:
FIELD Description
RID RID refers to the Routing Information Database. This
database contains information about the routes in the
system. Each RID identifies a flow and defines route related
information for that flow. The RID defines a flow based on the
VLAN Id. The database can be of 2 types, IRD( Independent
Routing Database) where there are more than one RIDs in